Discover and read the best of Twitter Threads about #StarshipSuperHeavy
Most recents (2)
(1/11) Why didn't #SpaceX use #Mechazilla to lift #Booster4 onto the #OrbitalLaunchMount?
This piece of equipment is the main reason for using the #LR11000 Super crane to lift the booster, instead of the #Chopsticks. I'm going to refer to it as the Locator Pin.
This piece of equipment is the main reason for using the #LR11000 Super crane to lift the booster, instead of the #Chopsticks. I'm going to refer to it as the Locator Pin.
(2/11) When fully extended, the locator pin is inserted into this position on the starship #StarshipSuperHeavy's Hydraulic Power Units (#HPU's). There are two of these located on either side of the booster.
📸:@considercosmos
📸:@considercosmos
(3/11) I'm not sure if the aero cover actually makes contact with this hard point on the booster, but its not meant to take much force either way. In order to not damage the booster, these locator pins are designed to have a relatively light tough.
📸:@StarshipGazer
📸:@StarshipGazer
(1/14) Hey #StarshipAddicts , @CSI_Starbase has concluded that #B4 is NEVER going to leave the ground under its own power & #B5 is just a massive lawn ornament.
#StarshipSuperHeavy #B7 is up next, lets look at some of the difference we have noticed so far!
📷:@RGVaerialphotos
#StarshipSuperHeavy #B7 is up next, lets look at some of the difference we have noticed so far!
📷:@RGVaerialphotos
(2/14) Fwd Dome Section:
On the FWD dome we see a new design for the stage separation clamps. These may have not been completed yet on #B7 but the initial shape of them is a departure from the previous boosters.
📷:@StarshipGazer | @CosmicalChief
On the FWD dome we see a new design for the stage separation clamps. These may have not been completed yet on #B7 but the initial shape of them is a departure from the previous boosters.
📷:@StarshipGazer | @CosmicalChief
